Synthesis and liquid crystalline behavior of bulky poly(methacrylamide)s

N‐(Bis(4‐(2‐ethylhexyloxy)phenyl)(phenyl)‐methyl)methacrylamide was synthesized and polymerized via reversible addition‐fragmentation chain‐transfer (RAFT) polymerization. The chain‐transfer agent (4‐cyano‐4‐(phenylcarbonothioylthio) pentanoic acid (CPADB)), combined with a chiral additive, and a radical initiator yielded polymers with dispersities between 1.2 and 1.4. At low concentrations, the polymers are soluble in hexanes and chloroform while at higher concentrations they swell in these solvents. Characterization of the polymers by wide‐angle X‐ray scattering (WAXS) revealed an interplanar distance of 19.0 Å. The WAXS data combined with polarized optical microscopy support a lamellar crystallization and lyotropic liquid crystalline behavior in hexanes and chloroform. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2563–2568     

Investigation of Suzuki–Miyaura catalyst‐transfer polycondensation of AB‐type fluorene monomer using coordination‐saturated aryl Pd(II) halide complexes as initiators

Novel triarylamine‐based coordination‐saturated aryl Pd(II) halide complexes ligated by PEt₃, PCy₃, and P(o‐tol)₃ were successfully synthesized by direct oxidative addition of aryl halide to the corresponding Pd(0) precursors. Suzuki–Miyaura coupling polymerization of 2‐(7‐halide‐9,9‐dioctylfluoren‐2‐yl)?1,3,2‐dioxaborinane with these Pd(II) complexes as initiators was investigated for the synthesis of poly(fluorene)s with triarylamine end group. Pd(II) complexes with PCy₃ or P(o‐tol)₃ exhibited catalytic activity and realized the catalyst‐transfer polycondensation at 75 °C and room temperature, respectively, while the polymerization using Pd(II) catalyst ligated by PEt₃ did not proceed, which indicated that the bulky phosphine ligands could facilitate the reductive elimination and further promote the polymerization. In addition, the dimeric Pd(II) complex with P(o‐tol)₃ can convert into monomeric Pd(II) intermediate with an open coordination site, which had a higher activity. The end groups of the afforded polyfluorene were analyzed by matrix‐assisted laser desorption ionization time‐of‐flight (MALDI‐TOF) mass spectrometry, in which the Ar/H end groups are indicative of the catalyst‐transfer polymerization. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1457–1463     

New soft porous frameworks based on lambda-zirconium phosphate and aliphatic dicarboxylates: Synthesis and structural characterization

New dicarboxylate-functionalized pillared materials with a general formula of λ-ZrPO₄(OH)_1-x(OOC(CH₂)_nCOO)_x/2(dmso) (n=6, 8 and 10) have been prepared by post-synthesis modification of the inorganic layers of λ-zirconium phosphate (λ-ZrP), where the superficial Chloride monovalent anionic ligands of λ-layer are partially exchanged with the divalent anionic ligands of a series of long-chain aliphatic dicarboxylic acids, namely octanedioic acid, decanedioic acid and dodecanedioic acid. The synthesized materials are characterized by X-ray diffractometry, FT-IR spectrophotometry, elemental and thermogravimetric analyses. The X-ray diffraction patterns show that the obtained solid phases are pure. Furthermore, the interlayer distance of λ-ZrP systematically increases from 1.02 to 1.59 nm as a result of the incorporation of the mentioned acids inside the interlayer gallery.     

Zn( L‐proline)2 as a powerful and reusable organometallic catalyst for the very fast synthesis of 2‐amino‐4H‐benzo[g]chromene derivatives under solvent‐free conditions

An efficient route for the synthesis of 2‐amino‐4H‐benzo[g]chromenes via a three‐component coupling reaction of aldehydes, malononitrile and 2‐hydroxy‐1,4‐naphthaquinone in the presence of Zn( L ‐proline)₂ is reported. High yields, short reaction times, non‐toxicity and recyclability of the catalyst, and easy work‐up are the main merits of this protocol. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis of tertiary amine‐based pH‐responsive polymers by RAFT Polymerization

Well‐defined tertiary amine‐based pH‐responsive homopolymers and block copolymers were synthesized via reversible addition‐fragmentation chain transfer (RAFT) polymerization using 4‐cyanopentanoic acid dithiobenzoate (CPAD) as the RAFT agent for homopolymers and a poly(ethylene glycol) (PEG) macro‐RAFT agent for the block copolymers. ¹H NMR and gel permeation chromatography results confirmed the successful synthesis of these homopolymers and block copolymers. Kinetics studies indicated that the formation of both the homopolymers and the block copolymers were well defined. The pKa titration experiments suggested that the homopolymers and the related block copolymers have a similar pKa. The dynamic light scattering investigation showed that all of the block copolymers underwent a sharp transition from unimers to micelles around their pKa and the hydrodynamic diameter (D_h) was not only dependent on the molecular weight but also on the composition of the block copolymers. The polymer solution of PEG‐b‐PPPDEMA formed the largest micelle compare to the PEG‐b‐PDPAEMA and PEG‐b‐PDBAEMA with a similar molecular weight. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1010–1022     

Study of blood collection and sample preparation for analysis of vitamin D and its metabolites by liquid chromatography–tandem mass spectrometry

The analysis of vitamin D status, with special emphasis on 25-hydroxyvitamin D and 1,25-dihydroxyvitamin D, is gaining interest in clinical studies due to the classical and non-classical effects attributed to this prohormone. In this research, the influence of the two steps preceding determination (viz. sample collection and preparation) on the quantitative analysis of vitamin D and its more important metabolites has been studied. Two preparation approaches, deproteination and solid-phase extraction (SPE), have been evaluated in terms of sensitivity to delimit their application, thus establishing that detection of 1,25-dihydroxyvitamin D cannot be addressed by protein precipitation. Concerning sample collection, serum and plasma reported high accuracy (above 83.3%) for vitamin D and metabolites, while precision, expressed as relative standard deviation, was below 12.9% for all analytes in both samples. Statistical analysis revealed that serum and plasma provided similar physiological levels for vitamin D₃, 24,25-dihydroxyvitamin D₃ and 25-hydroxyvitamin D₃, while significantly different levels were obtained for 1,25-dihydroxyvitamin D₃, always higher in plasma than in serum. Sample collection and treatment have proved to be significant in the analysis of vitamin D and its relevant metabolites.     

New di‐ and triorganotin(IV) carboxylates derived from a Schiff base: synthesis,characterization and in vitro antimicrobial activities

A new carboxylic acid, 2‐{[5‐(2‐nitrophenyl)furan‐2‐yl]methyleneamino}benzoic acid (HOBZ), has been produced by reacting 5‐(2‐nitrophenyl)furfural with 2‐aminobenzoic acid. Reactions of NaOBZ with organotin chlorides led to formation of [Me₃Sn(OBZ)] ( 1 ), [Bu₃Sn(OBZ)] ( 2 ), [Me₂Sn(OBZ)₂] ( 3 ) and [Bu₂Sn(OBZ)₂] ( 4 ). Complexes 1 , 2 , 3 , 4 have been characterized using elemental analyses and infrared, ¹H NMR, ¹³C NMR, ¹¹⁹Sn NMR and ¹¹⁹Sn Mössbauer spectroscopies. In the solid state, the OBZ ligands might coordinate to tin in an anisobidentate fashion via the carboxylate group. The in vitro antimicrobial activity of all compounds has been screened against the following fungi: Aspergillus niger, A. flavus, A. parasiticus, Penicillium citrinum, Candida dubliniensis, C. lusitaniae, C. albicans, C. tropicalis, C. parapsilosis and C. glabrata; and against the following bacteria: Staphylococcus aureus, Listeria monocytogenes, Bacillus cereus, Streptococcus sanguinis, Escherichia coli, Citrobacter frendii, Salmonella typhimurium and Pseudomonas aeruginosa. Complexes 2 and 4 exhibited higher biocide activity in comparison to 1 and 3 and to the control drugs nystatin and miconazole nitrate for the yeasts, and chloramphenicol and ampicillin for the bacteria. The biological activity of 2 was superior to that of 4 . In addition, the toxicity of HOBZ, NaOBz and 1 , 2 , 3 , 4 were determined using Chlorella vulgaris, revealing low toxicity of the complexes at MIC₅₀ concentrations. We also performed cell viability studies, using XTT assay, displaying no change in the mitochondrial function after 2–4 h of exposure of the microorganism to the complexes at MIC₅₀ concentrations. The butyl‐containing complexes 2 and 4 display greater lipophilicities than do the methyl analogues 1 and 3 , thereby endowing 2 and 4 with superior abilities to cross the microbe cell membrane, the possible mechanism of action. Copyright © 2015 John Wiley & Sons, Ltd.     

Investigation on Three-Dimensional Solubility Parameters for Explanation and Prediction of Swelling Degree of Polydimethylsiloxane Pervaporation Membranes

Using polydimethylsiloxane (PDMS) as a basic matrix to prepare ethanol and butanol permselective pervaporation membranes is a vibrant field. Many studies have verified that the three-dimensional Hansen solubility parameters (HSP) theory offers a valid explanation for the swelling performance of ethanol and butanol in PDMS. Five parameters (δ_D, δ_P, δ_H, δ_t, and R_a) are defined in HSP theory which can be individually used to explain the interaction strength between a solvent and a polymer. However, for the above five parameters, which one is the most effective parameter for deciding the swelling degree still needs to be determined. In this study, a commonly used hydroxy-terminated PDMS precursor was adopted to prepare the PDMS network. The HSP of the chosen PDMS precursor was measured by an advanced “solubility-rating” method. The special software package HSPiP (4.1.03), purchased from the HSPiP team, was used to process the “solubility-rating” results. The equilibrium swelling degree (Q value) of the PDMS network in water, ethanol, butanol, and toluene was measured and the relationships between the five HSP parameters of the solvents and the logarithmic equilibrium swelling degree, log(Q), were discussed. It was found that the measured polar parameter, δ_P, of PDMS was 0.12 MPa^0.5. The measured hydrogen bonding parameter, δ_H, was larger than δ_P, attaining a value of 8.6 MPa^0.5, because the hydroxy groups directly contributed to the hydrogen bonding solubility parameter, δ_H. With respect to the relationships between log(Q) and δ_D, δ_P, δ_H, δ_t, and R_a, linear relationships existed after plotting log(Q) vs. δ_P and log(Q) vs. δ_H. The linear relation degree of the fitted lines was 0.995 and 0.989, respectively. Their standard deviations were 0.149 and 0.232, respectively. Therefore, a better linear relationship existed between log(Q) and δ_P than the other solubility parameters. This indicated that the polar interaction was the main effect for deciding the swelling degree of the PDMS network in water and alcohol systems.     

Theoretical studies of the dependence of EPR g-factors on local structure for the trigonal Er3+–VK centres in KMgF3 and KZnF3

The dependence of the EPR g-factors on the local structural parameter for a 4f¹¹ configuration ion Er³⁺ in a trigonal crystal-field has been studied by diagonalizing the 364×364 complete energy matrices. Our studies indicate that the EPR spectra of the trigonal Er³⁺–V_K centers in KMgF₃ and KZnF₃ may be attributed to the translation of the cubic Kramers doublet Γ₇. Furthermore, the EPR g-factors of the trigonal Er³⁺–V_K centers may be interpreted reasonably by the shifts ΔZ≈0.340 Å and ΔZ≈0.303 Å of the Er³⁺ ions toward the charge compensator V_K along the C₃ axis for the KMgF₃:Er³⁺ and the KZnF₃:Er³⁺ systems respectively.